Thursday, April 2, 2009

New Book: Defensive Use of Firearms

One of our members, Stephen P. Wenger has recently published a book, titled Defensive Use of Firearms. The book addresses the reality and practicality of using a firearm for self-defense.

One aspect of that reality is that the software takes higher precedence than the hardware. Hardware is discussed but it is discussed in terms of practicality on the street or in the home, not on the shooting range. The five core chapters on mental awareness, mental preparedness, tactics, skills and choice of equipment are preceded by a chapter on safety with firearms and followed by a chapter on legal issues. A glossary is included, for the reader who may be new to the world of firearms. The foreword was graciously provided by Bert DuVernay, former director of the Smith & Wesson Academy.

The book is intended for the gun owner who has realized that mere ownership of a firearm does not convey protection. It will be of particular interest to those who are engaged in or are contemplating legal concealed carry of a handgun. While primarily oriented toward the handgun, the book contains some material about the defensive use of long guns, further expanding its relevance to home defense. The chapters on tactics and skills include numerous line drawings to aid the reader's grasp of the concepts described.

The book offers the reader a set of principles, tactics and techniques distilled from hundreds of hours of the author’s training, which includes certification as a law-enforcement handgun, shotgun, patrol rifle and tactical shooting instructor.

5 1/2 x 8 1/2-inch softcover, 120 pages, 28 illustrations and photos

At this time the book is only available from the author (autographed copies) or directly from Paladin Press. It will be several more months before Paladin will release the book to mass dealers, such as Amazon.com.

Only $20.00 plus shipping. For further information go to http://www.spw-duf.info/book.html. 

http://www.azarms.com

From the Arizona Arms Association Newsletter - February 2005

ADVICE FOR NEW COLLECTORS... HOW TO GET STARTED

ADVICE FOR NEW COLLECTORS... HOW TO GET STARTED

Good article by Man at Arms Magazine

Here at the offices of Man at Arms magazine, we often get asked by beginning collectors, "How can I get started?" Gun and sword collecting is a great hobby, but lots of folks just don't know where to begin. They don't want to make an expensive mistake with their first purchase, and they tend to be overwhelmed by the amazing variety of collectible weapons that are available.While no one has all the answers, we will try to set you off on the right course. We aren't making any guarantees, but perhaps you can sidestep a few obvious pitfalls.

• Pick a specialty. Do this right away. Ask yourself what period of history you enjoy. Find out whether you like pistols, rifles or swords. If you are a World War II enthusiast, collect Garand's. If you are entranced by the Wild West, collect 19th-century revolvers. If you need a helping hand in deciding, then go out and buy Flayderman's Guide. Every American gun collector should own this book, which can be purchased or ordered from almost any book store. It has hundreds of pictures and descriptions of all the popular 18th and 19th-century guns and pistols. If you prefer 20th century weapons, then you might want a copy of the Blue Book of Gun Values by S.P. Fjestad. Take out every book about guns at your local library. Take a look around and narrow your interests to a single topic. Now you will probably change your mind about what to collect as you go along, but it is very useful to start with a specialty...even if you don't stick with it.

• Start small. Don't rush out and spend a lot of money before you know what you are doing. We recommend purchasing one average example of the type of gun or sword that you have chosen to collect. Just one! Then buy as many books and magazine articles as you can and learn everything about the gun you own. Down the road you will probably find out that you bought the wrong gun for too much money - but buy that first example anyway. It will get your feet wet and help you understand what all the authors are talking about. You can't learn about guns and swords on a purely intellectual level; you have to hold them in your hands to appreciate them.

• Attend gun shows and gun club meetings. Contact the office of Man at Arms by e-mail or the NRA Gun Collecting Department for information about shows and clubs in your area. Collectors love to talk about their interests, so don't be shy. Introduce yourself as a new collector and make some contacts. If you can get to a major gun show, all the better. The bigger shows usually have educational displays and you will want to study all of them. Talk to the collectors who own these displays; they spent a lot of money and traveled a great distance to educate you about their specialty, so take advantage of this exceptional opportunity and thank them for providing this valuable service.

• Subscribe to all the magazines. Not just ours! A lot of collectors are big fans of Man at Arms, and don't think that they need to subscribe to any other magazines or club journals. This is a big mistake. These other publications all have good information in them and are worth getting. Remember: knowledge (in the form of books and magazines) is relatively cheap compared to the cost of making a mistake. Collectible guns and swords are expensive, and it is simply foolishness to make uninformed purchases.

• Be kind to yourself. You are going to make some mistakes. Everyone does - even the experts. But if you get preoccupied with your mistakes, you will never enjoy this hobby. Weapons collecting can be a tremendous amount of fun. You will meet a lot of great people and find new ways to learn about history, technology and art. If you take your time, learn before you spend and follow high ethical standards in your dealings with others, you will be well on your way to success.

Visit their website at: http://www.manatarmsbooks.com/index.html 

From the Arizona Arms Association Newsletter - February 2005

Determine How Old That Knife Is

Determine How Old That Knife Is!

By Bill Rudich

This article was written for a knife publication but the same principle can be used for firearms as well. ~ You should certainly be able to tell an 1890’s era Colt Single Action from a Second Generation.

Recently I had the opportunity to visit a metals analysis laboratory. While there I saw dozens of tests performed on some new stainless steel alloys. Testing is often performed on a metal sample to determine its properties, strength, and malleability and corrosion resistance. Even polish or the ability to be polished can be determined.

In the instance that brought me to the lab the alloy needed to be determined. It seems that some Chinese stainless is, as an example, marked T-34 but its magnetic properties are not the same as the American made alloy.

While we were waiting to get test results, which take only minutes, we discussed just how much can be determined about a sample. The people at this particular lab had recently tested an Indian ax for a customer prior to him paying big bucks for a potential fake.

“The Optical Spectrometer can date a metal sample to within 10 years of manufacture.”

They now have a pretty common Optical Spectrometer which can test metals nondestructively. The instrument needs a 1/8 inch diameter test spot. This can be in a hidden area on the item or sample. I was told the cost of the test runs about $45 to $60 dollars and it could save you a lot of trouble and money for something that wasn’t right. 

If the lab has a reference library, they can look back at alloy make-ups and determine when the item being tested was made. It seems alloys have changed over the years and although the Optical Spectrometer dating method cannot give you a specific year, it can date a metal sample to within 10 years of manufacture and often determine country of origin as well. The lab you use needs to have a good technical archive to determine the match of alloys to date. This dating is not to a specific year, but to within 10 years of manufacture.

A ten year span is close enough for our needs and will certainly be able to determine if it was made in 1860 or 1960. Or confirm if that the stiletto you are hoping to add to your collection is really from around 1958 or a later production 2000 model!

I should also mention that this equipment can test all metals including precious metals, copper, bronze, brass and the alloys of all these metals.

Working principle of a stationary metal analyzer

The principle of the analysis method of SPECTRO´s stationary metal analyzers is optical emission spectroscopy. Sample material is vaporized on the spark stand by an arc or spark discharge. The atoms and ions contained in the atomic vapor are excited into emission of radiation. The radiation emitted is passed to the spectrometer optics via an optical fiber, where it is dispersed into its spectral components. From the range of wavelengths emitted by each element, the most suitable line for the application is measured by means of a photomultiplier.

The radiation intensity, which is proportional to the concentration of the element in the sample, is recalculated internally from a stored set of calibration curves and can be shown directly as percent concentration.

Bill Rudich is a member of the Arizona Arms Association and the Editor of the Automatic Knife Association publication, AKA Switchblades. 

From the Arizona Arms Association Newsletter - February 2005

New hours of operation for Southeast Regional Park

The shooting range summer hours starting April 1 thru October 31 used to be 7am till 4pm. This is not the case anymore. 

The new hours of operation for Southeast Regional Park are now 8am till 5pm, Thursday thru Sunday, (all year long) and are closed on all recognized County holidays.

New hours of operation for Southeast Regional Park


Hours of operation
Closed Monday through Wednesday
New hours of operation for Southeast Regional Park 

Range is now 8am till 5pm

Thursday thru Sunday, (all year long) 


Closed on Major Holidays




http://www.tucsonshooting.com/Articles.php?action=detail&g=content1238552670

New hours of operation for Southeast Regional Park